Product ID:LACQUER SPRAY PAINT,GRAY 16187,IB 2670
MSDS Date:01/01/1987
FSC:8010
NIIN:00N008035
MSDS Number: BCPGC

ILLINOIS BRONZE PAINT COMPANY

300 EAST MAIN STREET
LAKE ZURICH, IL 60047-2580
US

Emergency Phone: 800-228-5635

Info Phone: 312-488-8001

Cage: 91794

ILLINOIS BRONZE PAINT COMPANY

LAKE ZURICH, IL 60047-2580 US

Telephone: 800-228-5635

Cage: 91794

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 5.0%

OSHA PEL 100 PPM

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 18.0%

OSHA PEL 100 PPM

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 35.0%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

50

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 31.0%

PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

Effects of Overexposure:INHAL:ANESTH.RESP TRACT IRRIT/ACUTE NERVOUS SYS
DEPRESS-SYMP INCLUDE HDACH,DIZZ,STAGGER(SEE SUPP DAT

First Aid:EYES:FLUSH IMMED W/LGE AMT OF H*2O FOR @ LEAST 15 MIN.SEE DR.
SKIN:WIPE OFF W/TOWEL.RMV REMAINDER W/MINERAL
SPIRITS,TURPENTINE/LACQUER THINNER(MFR).WASH W/SOAP & H*2O.REMOVE
CONTAM CLTHG. INHAL:REMOVE FROM EXPOSURE,GET FRESH AIR.

Flash Point:-40F, -40C
Lower Limits:0.8
Extinguishing Media:NFPA CLASS B EXTINGUISHERS-CO*2,DRY CHEMICAL/FOAM.
Fire Fighting Procedures:WEAR PRESS DEMAND SCBA,FULL PROT CLTHG.USE
H*2O(SEE SUPP DAT
Unusual Fire/Explosion Hazard:CANS WILL RUPTURE FROM INTERNAL PRESS @
190F,DISCHARGE.FLAM CONTENT.THERMAL DECOMP PROD-HCL,PHOSGENE

Spill Release Procedures:REMOVE ALL INGITION SOURCES(FLAME,HOT SURFACE
& ELECTRICAL,STATIC/FRICTIONAL SPARKS).AVOID BREATHING
VAPORS.VENTILATE AREA.REMOVE W/INERT ABSORBENT.

Handling and Storage Precautions:DONT STORE ABOVE 120F.DONT SPRAY IN
EYES,INGEST/BREATH VAP,SPRAY MIST.DONT PUNCTURE/BURN CAN.STORE LGE
QUANT IN BLDG DESIGNED FOR STORAGE OF FLAM LIQ.
Other Precautions:USE APPRVD RESPIRATOR IF FLAM CUT,BRAZE/WELD.NO
SMOKING IN AREA OF USE.DONT USE IN GENL VICINITY OF ARC
WELDING,OPEN FLM/HOT SURF.HEAT &/OR UV RADIATION MAY CAUSE HCL &/OR
PHOSGENE FORMATION.

Respiratory Protection:NIOSH/MSHA APPROVED RESP PROT DEPENDING ON
CONDITION OF USE.
Ventilation:GENL DIL/LOCAL EXH-KEEP CUT
Protective Gloves:NONE (MFR)
Eye Protection:NO SPECIAL PROT REQ (MFR)
Supplemental Safety and Health
OTHR INGRED:INERT RESINS & PIGMENTS,MAKE UP BALANCE OF PROD. OVEREXP
EFTS:GAIT,CONFUSN,UNCONSCIOUS/COMA.SKIN/EYE:PRIMARY IRRIT.SPEC FIRE
PROC:TO COOL CNTNR,PVNT PRESS & EXPLOSION. DOP:11/81.

Boiling Pt:B.P. Text:42-391F
Vapor Density:> 1
Evaporation Rate & Reference:PRPLT FASTER ETHER
Appearance and Odor:AEROSOL
Percent Volatiles by Volume:87

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:HCL,PHOSGENE,CO.

Waste Disposal Methods:DISPOSE OF IAW FEDERAL,STATE & LOCAL
REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT INCINERATE
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.